Product Introduction

ZC-701 Cable Identifier includes a transmitter and a receiver, it can be used to locate trace and depth of the underground cables and metallic pipes, also to identify the cable from a bunch of cables.

Product Features

Transmitter

·Output (Three mode): Direct connection output, Clamp Coupling output, Radiation induction.

·Frequency (6 for choice): 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, including 500Hz and 1kHz is complex frequency. It can realize the function of Correct/False indication and pipe identification with the help of Receiver.

·Fault signal output to detect Pipe grounding fault.

·Power output: Max. 10W, 4 steps adjustable.

· Automatic impedance matching and functions of overload&short-circuit protection.

·Power supply: Internal rechargeable Lithium battery. It can be recharged by charger (AC 220V) or car cigarette lighter (12V).

·If low battery, the instrument will shut down automatically, to protect battery.

· Robust and portable.

Receiver

·Left/Right arrow indication for Cable Route Tracing. (Patent technology)

·Correct/False indication (Patent technology). It will point to the forward when the detected cable is traced correctly. Otherwise, it will point to the backward and it will show "?".

·Strong anti-interference.

·Automatic measurement of depth and current.

·Various detection mode, more accurate.

·Detection frequency: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, suitable for different conditions.

·Two passive detection frequency bands: power frequency and radio frequency (RF). No need to connect with audio frequency generator.

· History curve display.

·Cable identification: Clamp identification and stethoscope identification. Clamp identification can measure the current amplitude and direction of cable precisely and give accurate result. Stethoscope identification is a traditional method when it is not convenient to use Clamp identification. It is easy wiring for Stethoscope identification.

·Grounding fault location.

·Built-in Rechargeable lithium battery.

·Automatic shut down if there is no operation in 30mins.

Robust and portable.

Product Parameters

Transmitter

·Output frequency:

·500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz. 500Hz and 1kHz are complex frequency. 8Hz is very low complex frequency. It is the frequency of fault location.

·Output power: Max.10W for 500Hz, 1kHz, 8kHz, 33kHz and fault location. frequency. Four steps adjustable: 2.5W, 5W, 7.5W, 10W. 1W for 66kHz and 93kHz.

·Output voltage: Max.200V (AC peak value), automatic adjustable according to the load.

·128*64 LCD display.

·Built-in Lithium battery: nominal 14.8V, 7Ah.

·External power supply: rated voltage DC12V (car cigarette lighter output)

·Charger: AC 100-240V input, 50/60Hz, output DC 16.8V,2A/3A.

·Size: 275*220*100mm.

·Weight: 2.4kg.

·Working condition: Temperature -10--40℃. Humidity 5-90% RH, Altitude<4500m.

·Input mode: Built-in receiving coil, Clamp, 1k Stethoscope, 8k Stethoscope, A type fault detection device.

·Receiving frequency:

Active detection frequency for Pipes: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz and 93kHz.

Passive detection frequency: Power frequency and radio frequency (RF).

Clamp identification frequency: 500Hz, 1kHz complex frequency.

Clamp current measurement frequency: 500Hz, 1kHz, 8kHz.

Stethoscope identification frequency: 1kHz, 8kHz..

Grounding fault location frequency: 8Hz complex frequency.